Even though goats can be difficult to keep penned in enclosures, it is not impossible to construct a reliable goat fence. A goat enclosure is typically used to separate the breeding bucks from the female goats. In this situation, an extremely strong pen should be constructed that allows no less than 200 sq ft of exercise space for a miniature buck or twice the size for a full grown adult buck. In order to build strong and sturdy goat pens, goat panels are used to build a fence in order to contain the goats effectively. By building a fence using goat panels, the goats will be secure and you will also be able to move the fence to different parts of your property with no difficulty. In this article, you will learn how to build a fence using goat panels.
The first step of building a goat fence includes finding out how large you want your goat enclosure or goat pen to be. Each goat panel is about 16 feet long and 48 inches tall. Consequently, if you want a goat fence with an area of 16 square feet, you will need 4 goat panels. In order to move the goat pen around easily, it is recommended to use 4–6 goat panels. These goat panels are available in different opening sizes, known as squares. You will need to ascertain the size for your livestock. For goats, larger squares should be suitable unless you have baby goats and want to keep them enclosed.
Once the size has been determined, you simply need to attach the goat panels together. It is recommended to have an assistant help you with the process. Once the goat panels have been attached, you need to wire the panels together using strong plastic fencing wire. You can also make use of metal wire if you prefer. In order to attach the goat panels together, simply wrap the fencing wire around the goat panels and pull them tight.
Lay the first two goat panels together end to end. You will then have to wrap the plastic or metal wire around the end of the goat panels. Pull the wire tight in order to fix the panels in place to give them added stability. Once the first two goat panels have been affixed together, you must stand the panels and fix the remaining panels in a similar manner. Once that is done, bring the ends together and attach them using a rope. Tie the rope at the top, bottom and one in the middle for added support.